The true tale of the Recycled Orchestra of Paraguay, an orchestra made up of children playing instruments built from recycled trash. The resources includes a lesson plan/book card, a design challenge, and copy of a design thinking journal that provide guidance on using the book to inspire students' curiosity for design thinking. Maker Challenge: Students will create their own musical instruments with recyclable materials.

A document is included in the resources folder that lists the complete standards-alignment for this book activity.

Tony Sarg was a puppeteer and marionette master who invented the first, larger than life, helium balloons for the annual Macy’s Thanksgiving Day Parade. The resource includes a lesson plan/book card, a design challenge, and copy of a design thinking journal that provide guidance on using the book to inspire students' curiosity for design thinking. Maker Challenges include: (1) Dash/Sphero: Develop a Macy’s Day Parade route using tape on the ground with a partner. Then, switch routes with another group and program the robot of your choice to navigate the parade route using code. (2) Ozobot: Develop a synchronized dance routine for both Ozobots for the stage of the Macy’s day parade using https://ozoblockly.com/editor (3) Create a moveable puppet that will be featured in the Macy’s Day Parade.

A document is included in the resources folder that lists the complete standards-alignment for this book activity.

The true, inspiring story of Beauty, the bald eagle, who was shot, rescued, and received a 3D-printed prosthetic beak. The resource includes a lesson plan/book card, a design challenge, and copy of a design thinking journal that provide guidance on using the book to inspire students' curiosity for design thinking. Maker Challenges: (1) Use paper and pencil to design a prosthetic body part for a human or animal. Then use tinkercad.com to create a prototype. Finally, use a 3D printer to print the prosthetic. (2) Have students research animals who use prosthetics. Then, improve the design in Tinkercad and 3D Print.

A document is included in the resources folder that lists the complete standards-alignment for this book activity.

Experiment with rocket designs and a PVC launcher to discover how high—and how far—you can make your rockets go.

Using scrap metal and spare parts, William Kamkwamba created a windmill to harness the wind and bring electricity and running water to his Malawian village. The resource includes a lesson plan/book card, a design challenge, and copy of a design thinking journal that provide guidance on using the book to inspire students' curiosity for design thinking. Maker Challenge: Develop a way to harness the wind by designing with Strawbees.

A document is included in the resources folder that lists the complete standards-alignment for this book activity.

Ralph Baer’s family fled Nazi Germany for the US when he was a child. Using wartime technology, Baer thought outside the box and transformed the television into a vehicle for gaming. His invention was the birth of the first home console, the Odyssey, a precursor to the Atari gaming system. The resource includes a lesson plan/book card, a design challenge, and copy of a design thinking journal that provide guidance on using the book to inspire students' curiosity for design thinking. Maker Challenges: (1) Think outside the box. What’s something you use everyday, but not for its “intended” purpose? Examples: A broom to clean the snow off your car windshield, a trash bag as a sled. Now, think of a problem you might have at school, home, et al. Invent an item that would solve this problem. (2) Let’s think outside the box! Design the latest and greatest technology for kids to hit the market! Make it the *most* fun anyone has ever had. You may NOT use anything on the market - any technology currently on the market is off limits. Use your imagination, do not put limitations on it, and be as creative as you can. (3) Use household items to create a prototype of your new invention.

A document is included in the resources folder that lists the complete standards-alignment for this book activity.

Students build their own satellite using household materials. Through the process, they learn about satellites and their functions.

A simulation that shows the rate and scope of spread of COVID-19 in a community. Students can change variables such as number of people, number of vaccinated people, workplace policies, school policies, etc.

A simulation that shows the rate and scope of spread of COVID-19 in a community. Students can change variables such as number of people, schooling plans, etc. A more advanced version of this simulation can be found at https://openscied-static.s3.amazonaws.com/HTML+Files/COVID-19+Vaccination.html

Two blobs of clay go on an enjoyable adventure as they transform themselves into fun shapes and new things throughout their escapade. What will they be by the end of the book? The resource includes a lesson plan/book card, a design challenge, and copy of a design thinking journal that provide guidance on using the book to inspire students' curiosity for design thinking. Maker Challenge: Design a stop-motion video that morphs an item of your choice into another item. Before you begin, sketch out the process you’ll take to transform your item.

A document is included in the resources folder that lists the complete standards-alignment for this book activity.

As GIS technicians, students examine dams along the Mersey River Watershed to determine whether there are any locations suitable for the construction of a fishway. Once they identify the best potential location, they will calculate the dam's upstream watershed to help determine how much additional habitat could be made accessible by constructing the fishway.

The phenomenon is thermal expansion of copper. This demonstration allows an observer to see the effect of heating (and cooling) a copper tube. When heated, the copper tube lengthens and thickens. When cooled, the tube shrinks. The lengthening of the rod rotates a toothpick with an attached flag to make the expansion visible and measurable.

It’s easy to take today’s ubiquitous colored crayons for granted, but they were the result of one individual’s innovation. Biebow introduces Edwin Binney—a mustachioed man and head of a carbon black factory—who wished to make color-pigmented wax crayons that reflected the world outside. The resource includes a lesson plan/book card, a design challenge, and copy of a design thinking journal that provide guidance on using the book to inspire students' curiosity for design thinking. Maker Challenge: Think about the school/community/world in which you live and identify a problem that could be solved with a new invention.

A document is included in the resources folder that lists the complete standards-alignment for this book activity.

In this activity related to magnetism and electricity, learners discover that a magnet falls more slowly through a metallic tube than it does through a nonmetallic tube. Use this activity to illustrate how eddy currents in an electrical conductor create a magnetic field that exerts an opposing force on the falling magnet, which makes it fall at a slower rate. This activity guide also includes demonstration instructions involving two thick, flat pieces of aluminum to illustrate the same principle.

Egg parachutes with the theme of Futurama. Without mentioning the word 'Parachute' to students need to think in more inventive and creative ways.

Students learn about the process of reverse engineering and how this technique is used to improve upon technology. Students analyze push-toys and draw diagrams of the predicted mechanisms inside the toys. Then, they disassemble the toys and draw the actual inner mechanisms. By understanding how the push-toys function, students make suggestions for improvement, such as cost effectiveness, improved functionality, ecological friendliness and any additional functionality they determine is an improvement.

Watch as your students experience the magic of magnetics while exploring a futuristic transportation modality.

Students conduct experiments to determine the flow rate of faucets by timing how long it takes to fill gallon jugs. They do this for three different faucet flow levels (quarter blast, half blast, full blast), averaging three trials for each level. They convert their results from gallons per second (gps) to cubic feet per second (cfs).

When you add water to effervescent (fizzy) tablets or baking powder, bubbles are formed: a gas is produced. You can use this gas to inflate a balloon without blowing it up yourself. What kind of gas is it? Let us collect this gas and analyse it through experiments.

Objective
SWBAT plan and carry out an investigation using science and engineering practices.

Big Idea
Welcome to the water park! Students will create a “lazy river” boat from aluminum foil that will hold the most passengers.